Shoring

Made up of modular towers, point shoring and accessories, the components of our metal shoring system are manufactured using high-quality raw materials and under strict quality standards.

In addition, all projects are designed in compliance with all current technical standards, especially NBR-15.696 (Formwork and shoring for concrete structures - Design, dimensioning and executive procedures) and NBR 7190 (Design of wooden structures).

All the components are easy to fit together, making them easy to assemble, overlap and dismantle, and most of them are easily transported around the site by hand. They are highly resistant, allowing larger spans to be opened between the uprights, thus facilitating transit through the site, and their perfect coupling with our bracing system allows them to reach great heights with strength and ease. Finally, all components are made from recyclable or reusable materials.

Equipment that makes up the system

TABLE 100

Dimensions: 1.20 m x 1.00 m
Function: Modulate the shoring towers and give stability to the assembly (use only on other frames).

TABLE 150

Dimensions: 1.20 m x 1.50 m
Function: Modulate the shoring towers and give stability to the assembly.

150-E FRAME WITH LADDER

Dimensions: 1.20 m x 1.50 m Function: Modulate the shoring towers and give stability to the whole.

TABLE 200

Dimensions: 1.20 m x 2.00 m
Function: Modulate the shoring towers and give stability to the assembly.

200-E FRAME WITH LADDER

Dimensions: 1.20 m x 2.00 m
Function: Modulate the shoring towers and give stability to the assembly.

TABLE 250

Dimensions: 1.20 m x 2.50 m
Function: Modulate the shoring towers and give stability to the assembly.

250-E FRAME WITH LADDER

Dimensions: 1.20 m x 2.50 m
Function: Modulate the shoring towers and give stability to the assembly.

LOCKING X 150 / 200

Dimensions: 1.50 m and 2.00 m
Function: Joining the frames, bracing and giving the tower a rectangular shape.

FRAME COUPLING

Dimensions: 0.20 m
Function: Coupling the frames in the overlap fitting, with 0.10 m coupling on each frame.

FIXED BASE

Function: To facilitate the leveling of tower bases.

ADJUSTABLE BASE

Dimensions: 0.50 m solid thread. Function: To facilitate the leveling of tower bases in the face of unevenness and obstacles with high precision and resistance.

25D ADJUSTING FORK

Dimensions: 0.25 m solid thread. Function: To support 1 or 2 V3 or V4 beams at ends or transverse, as well as leveling the forms.

25S ADJUSTMENT FORK

Dimensions: 0.25m of solid thread Function: To support 1 V3 or V4 beam at the ends, as well as leveling the forms

40D ADJUSTING FORK

Dimensions: 0.40 m solid thread. Function: To support 1 or 2 V3 or V4 beams at ends or transverse, as well as leveling the forms.

40S ADJUSTMENT FORK

Dimensions: 0.40 m solid thread Function: To support 1 V3 or V4 beam at the ends, as well as leveling the forms.

H20 ADJUSTING FORK

Dimensions: 0.40 m solid thread. Function: To support 1 or 2 primary H20 beams, both transverse and at the ends, as well as leveling the forms.

DRILLED BASE

Dimensions: 0.10 / 0.20 / 0.25 / 0.50 / 0.70 m.
Role: To support the assembly of pitchforks on beam bottom towers, shoring up the slabs.

PERIPHERY CONSOLE (FRENCH HAND)

Function: to serve as a working platform for peripheral beam towers or as shoring for beams/slab slabs on the periphery, when necessary.

SCORE B1T1 L

Minimum opening: 1.50 m
Maximum opening: 2.70 m
Function: Tubular prop.

SCORE B1T2 L

Minimum opening: 1.50 m
Maximum opening: 3.20 m
Function: Tubular prop.

ESCORA B2T1 L

Minimum opening: 2.00 m
Maximum opening: 3.20 m
Function: Tubular prop.

ESCORA B2T2 L

Minimum opening: 2.00 m
Maximum opening: 3.70 m
Function: Tubular prop.

SCORE B1T1 E

Minimum opening: 1.50 m
Maximum opening: 2.70 m
Function: Tubular prop with high load capacity.

SCORE B1T2 E

Minimum opening: 1.50 m
Maximum opening: 3.20 m
Function: Tubular prop with high load capacity.

SCORE B2T1 E

Minimum opening: 2.00 m
Maximum opening: 3.20 m
Function: Tubular prop with high load capacity.

SCORE B2T2 E

Minimum opening: 2.00 m
Maximum opening: 3.70 m
Function: Tubular prop with high load capacity

SCORE B2T3 E

Minimum opening: 2.00 m
Maximum opening: 4.70 m
Function: Tubular prop with high load capacity.

STRUT PITCHFORK S

Function: Used to support 1 V3 or V4 beam in the shoring system.

PROP FORK D

Function: Used to support 1 or 2 V3 or V4 beams in the shoring system.

H20 PROP FORK

Function: Used to support 1 or 2 H20 beams in the shoring system.

STRUT TRIPOD

Function: To stabilize the strut in a vertical position to aid assembly.

STRUT PIN

Function: Locking the strut at the required height setting.

STRUT CROSS

Function: Attached to the top of the strut, its purpose is to help with shoring by supporting the bottom of the beam formwork.

MULTI ART POST

Dimensions: 0.50 / 1.00 / 1.50 / 2.00 / 2.50 m.
Function: Adaptable and sturdy pole, used in conjunction with Multi ART sleepers to form a tower with a high load capacity.

MULTI ART PLATTER

Dimensions: 0.60 / 1.10 / 1.60 / 2.10 m. Function: Joins the Multi ART poles, bracing and giving the Tower a rectangular shape.

MULTI ART COUPLING

Function: Coupling the Multi ART poles by overlapping, with 0.10 m of coupling on each pole.

VIGA V3

Dimensions: 0.075 m high x 2.00 / 2.50 / 3.00 / 3.50 m.
Function: Works as the main beam in shoring.

VIGA V4

Dimensions: 0.10 m high x 2.00 / 2.50 / 3.00 / 3.50 / 4.00 m.
Function: Works as the main beam in shoring.

H20 BEAM

Dimensions: 0.20 m high x 1.80 / 2.45 / 2.90 / 3.30 / 3.90 / 4.50 / 4.90 / 5.90 m. Function: Works as the main beam in shoring.

VIGA VB

Dimensions: 0.075 m high x 1.50 / 2.00 / 2.50 / 3.00 m.
Function: Mixed timber/metal beam, used as a secondary beam in barroading.

BEAM H15

Dimensions: 0.15 m high x 1.50 / 2.00 / 2.50 / 3.00 m.
Function: Wooden beam used as a secondary beam in barroading.

BRACING TUBES

Dimensions: Diameters 42.20 and 48.30 mm x 0.50 / 1.00 / 2.00 / 2.50 / 3.00 / 3.50 / 4.00 / 4.50 / 5.00 / 5.50 / 6.00 m. Function: Bracing / locking towers.

FIXED CLAMP

Dimensions: For 42.20 and 48.30 mm tubes. Function: Used to fix the bracing tubes to the towers.

SWIVEL CLAMP

Dimensions: For 42.20 and 48.30 mm tubes. Function: Used to fix the bracing tubes to the towers.

LENGTHENER

Function: To extend the length of the struts.

Locks

ANCHOR BAR WITH FLANGE

Dimensions: 0.75 / 1.00 / 1.25 / 1.50 / 2.00 / 2.50 / 3.00 m.
Function: Used for locking formwork and pillars using the anchor nut at 1 end

ANCHOR BAR WITHOUT FLANGE

Dimensions: as requested.
Function: Used for locking formwork and pillars, for the use of anchor nuts at both ends.

ANCHOR NUT

Dimensions: Diameter 5/8″.
Function: Used with Anchor Bars to adjust locking.

BEAM BOTTOM CLIP (PUPPY)

Function: United by the Anchor Bar, they ensure the stability of the formwork at the bottom of the beams.

SUPPORTER

Dimensions: 0.40 m solid thread Function: Used to vertically level wall and column panels and formwork.

VIGA V50

Dimensions: 0.05 m x 1.20 m.
Function: Metal beam used to tie together columns and beams.

VIGA V3

Dimensions: 0.075 m high x 2.00 / 2.50 3.00 / 3.50 m.
Role: Works on locking walls, beams and pillars.